High-Bulk-Density • Friable Compounding Fluoroadditive

Everflon™ PTFE Micropowder MVP. Engineered for High-Pressure Lubricity & Polymer Wear Life.

A free-flowing, high-bulk-density PTFE additive engineered with friable 12 µm agglomerates that de-agglomerate down to 0.2 µm under standard processing shear. Delivers unmatched friction reduction, anti-stick surface properties, and extended service life in engineering thermoplastics and severe-duty lubricants.

~12 µm → 0.2 µm

Particle Size (Agglomerate → Primary)

500 g/L

Average Bulk Density

5 – 10 m²/g

Specific Surface Area (BET)

-310 °F to 480 °F

Continuous Operating Range (-190°C ~ 250°C)

High Bulk Density. Superior Compounding Efficiency.

Everflon™ MVP is designed with higher bulk density for clean, low-dust feeding and friable agglomerates that produce an intimate blend with host polymer matrices.

⚙️

Friable 12 µm De-Agglomeration

Though supplied as free-flowing 12 µm agglomerates, the particles readily break down under compounding shear down to 0.2 µm, delivering intimate micro-dispersion without clumping.

🛡️

Internal Lubricity & Wear Reduction

Acts as an internal dry lubricant in engineering plastics and dynamic elastomers. Significantly lowers surface friction, eliminates stick-slip, and prevents continuous mechanical wear.

🧪

Severe-Condition Stability

Completely inert to aggressive industrial chemicals, hydraulic fluids, and solvents. Operates smoothly from cryogenic temperatures up to 480°F (250°C) with zero water absorption.

Formulated for Engineering Resins & Severe Lubrication.

Optimized loadings for masterbatch compounding, twin-screw extrusion, and grease formulations.

Loading: 5% – 20%

Engineering Thermoplastics

Compounded into polyacetals (POM), polyamides (PA), polycarbonates (PC), polyesters, polyimides, and polysulfones. Reduces gear/bearing friction and noise while eliminating PV wear limits.

Loading: 5% – 20%

Elastomers & Dynamic Seals

Ideal for fluoroelastomers (FKM), silicones, neoprenes, acrylates, and nitriles (NBR). Prevents seal binding, improves tear resistance, and minimizes starting torque.

High-Viscosity Bases

High-Pressure Specialty Lubricants

Forms smooth, uniform suspensions in silicone, fluorosilicone, and hydrocarbon bases. Increases lubricity and component service life in corrosive, high-load, and high-temp environments.

Surface Treatment

Dry Film & Anti-Stick Coatings

Provides clean-release dry lubrication on metallic and non-metallic slides, chutes, and fasteners where liquid wet lubricants cannot be tolerated.

Technical Specifications & Property Data

Meets ASTM D5675 Standard Specification for Fluoroadditive Powders (Group 1, Class 2, Grade 1 or 2)

Property Parameter	Test Method	Standard Unit	Typical Value (MVP)
Appearance	Visual	—	White Free-Flowing Powder
Average Particle Size (Volume Basis)	ASTM D4464 (Laser)	µm	12 (dispersible to 0.2)
Average Bulk Density	ASTM D4894	g/L (lb/ft³)	500 (31.2)
Melting Peak Temperature	ASTM D4894 / DSC	°C (°F)	325 (617)
Specific Surface Area	ASTM D4567 (BET)	m²/g	5 – 10

Packaging Standard: 25-kg (55.1-lb) rugged fiber drums | 8 drums per pallet Regulatory Compliance: RoHS, REACH, TSCA Compliant Technical Inquiries: support@everflon.com