Solutions
Fluoropolymer material candidates for oil, gas and mineral-processing equipment. Explore Everflon™ options for insulation, fluid paths, seals and liners—starting with the conditions your component will face.
Applications ↓ContactConcept illustration; not a production assembly.
Insulation and jacket concepts for logging, instrumentation and field equipment.
Design brief — Specify conductor geometry, electrical stress, temperature, fluids and bending. Evaluate the complete cable, connections and any pressure exposure.
Tube and liner development for oilfield chemicals and process fluids.
Design brief — Identify the exact mixture, pressure cycles and fittings. Establish permeation and leak-test targets; assess reinforcement and the complete hose assembly.
Material selection for gaskets and engineered sealing elements.
Design brief — Provide flange geometry, assembly load, pressure and temperature cycles. Check creep, dimensional change and leakage with the seal designer.
Development of fluid-contact parts, seats and selected actuator interfaces.
Design brief — Describe media, motion, load and clearances. Evaluate the actual contact pair, mating surfaces and changes after conditioning.
Protective-layer concepts for piping and process equipment.
Design brief — Define substrate, coating or lining route, thickness and joints. Test adhesion, continuity, permeation and mechanical support on representative parts.
Component review for mineral-processing transfer circuits and storage interfaces.
Design brief — Report reagent composition, solids content, particle size and flow. Evaluate erosion and abrasion separately from chemical compatibility.
These are development candidates, not equipment approvals. Confirm current grade data, manufacturing fit and part-level evidence for the intended service.
An ETFE grade listed for wire and cable insulation, tubing and molded parts. Discuss extrusion geometry and processing; downhole or subsea use requires a separate finished-cable evaluation.
Review material options ↗A melt-processable FEP grade presented for tubing, bellows and related industrial components. Share dimensions, fluid composition and forming conditions before selecting a trial.
Review material options ↗A PFA resin candidate for fluid-handling components. Define extrusion or molding, geometry and service cycles. This pellet recommendation does not specify a coating or rotational-lining grade.
Review material options ↗Discuss compression molding and machining with the required seal geometry and loads. Evaluate unfilled or filled compositions individually; resin data does not establish seal life.
Review material options ↗High pressure, gas exposure and electrically conductive service require specific design reviews. A fluoropolymer name does not define a pressure rating, gas-service qualification or static-dissipation performance.
Record composition, concentration, gas content, contaminants, temperature and duration. Include shutdown and cleaning conditions.
Define pressure cycling, decompression, bending, assembly loads and solids. Test the construction that will be installed.
Review fittings, joints, adjacent materials and support. Agree on measurable leak, wear and electrical criteria with the equipment designer.
01
Send drawings, material form, process route, operating conditions and required documentation.
02
Request current technical data and SDS. Agree on samples, process settings and acceptance criteria.
03
Review fittings, joints, adjacent materials and support. Agree on measurable leak, wear and electrical criteria with the equipment designer.
ETFE 4010 for suitable insulation projects, FEP 4603 or PFA 403 for fluid-component trials, and PTFE molding powders for selected seals or machined parts. Confirm each grade against the actual duty.
No. Wall geometry, reinforcement, fittings, temperature and aging all require assessment. Pressure capability belongs to the qualified assembly, not the polymer name.
No. Identify gas composition, pressure, temperature and decompression conditions. Request application-specific evidence and evaluate the finished component.
No. Solid particles and flow can introduce erosion or abrasion. Test the actual particle distribution, concentration, velocity and contact geometry.
No. Define the electrical requirement and discuss a dedicated material or construction. Verify resistance and the complete grounding arrangement where relevant.
Share your component, media and operating conditions. Start a focused materials discussion with Everflon.
Contactinfo@everflon.com ↗
