Solutions
Food processing / Material possibilities
PTFE, PFA and FEP fluoropolymers for food processing development. Explore coating, tubing and sealing concepts with Everflon™ — and start with the conditions that matter to your equipment.
Coat. Convey. Connect. Concept illustration; material suitability depends on the finished design.
01 / Application design
Start with the part, the process and the product it will touch. Each application needs its own material brief.
01 / Cookware & bakeware
Coating concepts for pans, trays and food preparation equipment.
Design brief: Record the substrate, coating stack, cure schedule and expected wear. Compare release performance before and after representative use.
02 / Coated processing fabrics
Coated glass-fabric concepts for belts and release sheets.
Design brief: Define belt speed, flex radius, tension, edge construction and food exposure. Evaluate the assembled belt and joint, not just a flat coating sample.
03 / Beverage & appliance tubing
Tube concepts for beverage handling and coffee-machine fluid circuits.
Design brief: Specify fluid composition, dimensions, pressure, temperature and connection design. Check the complete assembly through the intended operating cycle.
04 / Gaskets & sealing components
Material discussions for seals in processing equipment.
Design brief: Provide flange geometry, assembly load and movement. Review compression, dimensional stability and replacement criteria with the component designer.
05 / Filling & process equipment
Fluoropolymer concepts for valve, pump and filling-system components.
Design brief: Map all wetted surfaces and joining details. Assess mechanical duty alongside product contact and cleaning exposure.
06 / Packaging equipment
Release-surface concepts around packaging and heat-sealing operations.
Design brief: Separate equipment-contact requirements from direct packaging use. Record dwell time, pressure, film structure and acceptable seal quality.
02 / Everflon material candidates
These grades are starting points for technical discussion. Confirm current data, processing suitability and food-contact documentation for the exact grade, formulation and intended use.
Coating formulation
A D60 dispersion grade described for non-stick cookware formulations. Discuss the complete coating system, substrate preparation and processing route with your formulator.
Explore PTFE D60C ↗Fabric coating
A D60 dispersion grade intended for fiberglass cloth coating. Consider a development trial for coated-fabric constructions, with attention to coat build, fabric coverage and flexing.
Explore PTFE D60F ↗Melt processing
A PFA resin candidate for fluid-handling component development. Share the intended extrusion or molding route and dimensional requirements before selecting trial conditions.
Explore PFA 403 ↗Tubing development
A melt-processable FEP grade presented for tubing and related industrial components. Discuss its processing fit for your proposed fluid circuit; request application-specific documentation.
Explore FEP 4603 ↗Need a molded PTFE seal? Send the part geometry and molding route for a separate resin recommendation. A dispersion grade is not a substitute for a molding powder.
03 / From material to finished equipment
Describe the food or beverage, contact time, operating temperature and repeat-use pattern. Identify the intended market when requesting supporting documentation.
List the cleaning agents, concentrations, temperatures and exposure times. Include the sequence of production, cleaning and restart in the evaluation plan.
Record every layer, additive, joint and exposed component. Assess representative finished parts against agreed acceptance criteria before production release.
04 / A clearer development brief
01
Send a drawing or dimensions, material form, production route and target output. Indicate which surfaces contact the product.
02
Ask for current technical data, SDS and available food-contact documentation. State the exact grade and intended conditions so the review has a defined scope.
03
Plan samples, inspection methods and functional testing with the converter or equipment maker. Capture the formulation and process settings used for each trial.
05 / Food processing material FAQ
Start with the manufacturing route: PTFE D60C for coating formulation discussions, PTFE D60F for glass-fabric coating trials, and PFA 403 or FEP 4603 for suitable melt-processing projects. These are development candidates, subject to a review of the exact application.
No. A candidate grade does not establish the suitability of a finished coating, tube or seal. Request documentation covering the exact material and intended conditions, then evaluate the finished construction.
A dispersion is a raw material for a defined formulation and process. Work with the coating developer on substrate preparation, layer structure, application and thermal processing.
Include fluid composition, inner and outer diameter, pressure, temperature, bend geometry and fittings. Add cleaning exposure and expected use cycles.
No. Set cleaning and inspection criteria for the actual equipment and process. Evaluate the finished surface after representative operation and cleaning.
06 / Start a material conversation
Share your component, manufacturing route and operating conditions. Everflon can help you start a focused material-selection discussion.
