Everflon™ Injection Molding Guide
INJECTION MOLDING GUIDE
Connect the material, the mold and the process.
Explore seven technical topics covering Everflon™ FEP, PFA and ETFE, from material behavior and machine selection to molding operations and troubleshooting.
GUIDE 01
Compare FEP, PFA and ETFE material characteristics, melt flow, thermal stability and melt fracture.
Materials and flow characteristics
Material families
Melt-processible fluoropolymers
Typical properties
GUIDE 02
Review corrosion-resistant contact parts, screws, nozzles, non-return devices, temperature control and machine sizing.
Equipment selection starts with the resin-contact components.
Equipment overview
Resin-contact materials
Screw and nozzle design
GUIDE 03
Plan mold materials, sprue bushings, runners, gates and mold heating around the part geometry and flow path.
Connect the gate layout with the part geometry.
Mold materials
Sprue bushings
Runners
GUIDE 04
Assess tolerances, wall thickness, flow direction, mold temperature, shrinkage allowances and annealing.
Evaluate flow-direction and transverse shrinkage separately.
Tolerances
Shrinkage factors and FEP/PFA thickness table
ETFE thickness and directional shrinkage
GUIDE 05
Organize shutdown, restart and cleanout procedures with temperature, injection speed, pressure and cycle settings.
Distinguish machine settings from actual melt temperature.
Overnight shutdown
Restart sequence
Cleanout procedure
GUIDE 06
Review regrind cleanliness, pigment blending, thin-wall filling and glass-reinforced ETFE processing differences.
Thin-wall FEP/PFA and reinforced ETFE need different packing strategies.
Reuse of resin
Pigmentation and five-step dry blending
Thin-section filling and delamination
GUIDE 07
Review local exhaust, temperature and pressure controls, contamination prevention and the complete troubleshooting matrix.
Troubleshooting connects 19 symptoms with 31 possible measures.
Local exhaust ventilation
Temperature and pressure limits
Contamination and exposure prevention
INQUIRY