Blog

Blog

FEP Extrusion and Molding Methods

Nov. 12, 2026

FEP Extrusion and Molding Methods
FEP

EverflonTM FEP 4610

FEP Extrusion and Molding Methods

Match processing methods to grade, melt viscosity, equipment and product requirements.

Source data, charts and compliance statements concern another manufacturer’s reference material. Renaming a grade does not establish equivalence or measured performance for Everflon FEP 4610. Curves are approximate illustrations, not engineering input.
FABRICATION TECHNIQUES

Fabrication Techniques

FEP is a thermoplastic. Depending on grade and melt viscosity (related to melt flow), it can be injection, compression, transfer or rotational molded.

It can also be extruded as rods, tubes, films and profiles or coated onto wire as primary insulation or jacketing.

Processing methods listed in the source
MethodEnglish termDescription
Injection moldingInjection moldingDepends on grade and melt viscosity
Compression moldingCompression moldingDepends on grade and melt viscosity
Transfer moldingTransfer moldingDepends on grade and melt viscosity
Rotational moldingRotational moldingDepends on grade and melt viscosity
ExtrusionExtrusionRods, tubing, film and profiles
Wire coatingWire coatingPrimary insulation or jacketing
RESIN SELECTION

Resin Selection

Resin selection depends on processing capability and required properties. Match equipment, grade and product requirements. This chapter gives no ready-to-use barrel/mold temperatures, screw speeds or pressures.

PROCESSING INFORMATION

Processing Information

The source refers detailed injection, extrusion and transfer techniques to its manufacturer's guides. Obtain the corresponding Everflon grade data and processing guidance.

This is an overview of FEP as a material class, not validation of every method for 4610.

Source data, charts and compliance statements concern another manufacturer’s reference material. Renaming a grade does not establish equivalence or measured performance for Everflon FEP 4610. Curves are approximate illustrations, not engineering input. · Product and Properties Handbook: Fabrication Techniques; Resin Selection; Processing Information