Blog

Blog

FEP Poisson’s Ratio, Fatigue and Impact Resistance

Nov. 04, 2026

FEP Poisson’s Ratio, Fatigue and Impact Resistance
FEP

EverflonTM FEP 4610

FEP Poisson’s Ratio, Fatigue and Impact Resistance

Review Poisson’s ratio and fatigue data, and the role of geometry in impact performance.

Source data, charts and compliance statements concern another manufacturer’s reference material. Renaming a grade does not establish equivalence or measured performance for Everflon FEP 4610. Curves are approximate illustrations, not engineering input.
POISSON’S RATIO

Poisson’s Ratio

The source gives Poisson's ratio at two temperatures. Poisson's ratio is dimensionless.

Table 3 | Poisson's ratio (source reference)
°C°FPoisson's ratio
23730.48
1002120.36
FATIGUE RESISTANCE

Fatigue Resistance

Static stress–strain curves alone are insufficient for cyclic-load design. The source discusses an endurance limit by analogy with ferrous alloys; allowable values require testing of the relevant material and conditions.

Reference data below were obtained at 23°C (73°F) using a Sonntag-Universal fatigue machine.

Table 4 | Fatigue data at 23°C (source reference)
Stress, MPaStress, psiCycles to failure
6.91,000>7,000,000
9.651,400>7,200,000
10.01,4501,300
10.31,500960

The source expects higher-molecular-weight FEP to withstand more cycles at a given stress.

“>” is a reported lower bound, not an exact failure count or infinite-life guarantee. Full waveform, frequency and specimen details are absent, so these values cannot be converted directly to years of service.
IMPACT RESISTANCE

Impact Resistance

Impact toughness is difficult to predict because geometry matters. Energy is absorbed through internal force and deformation distance; appropriate flexibility increases that distance and lowers internal force. Some factors affecting metals also affect plastics.

The reference material showed good impact behavior over a broad temperature range and no break in notched Izod testing down to −60°C (−76°F). This is not a test claim for grade 4610.

There is no universal exact conversion from impact data to part performance. Reduce sharp corners and stress concentrations and provide appropriate flexibility. Test prototypes under actual loads.

Source data, charts and compliance statements concern another manufacturer’s reference material. Renaming a grade does not establish equivalence or measured performance for Everflon FEP 4610. Curves are approximate illustrations, not engineering input. · Product and Properties Handbook: Poisson’S Ratio; Fatigue Resistance; Impact Resistance