EverflonTM FEP 4610
Thermal Properties & Melting Temperature
Melting range, thermal analysis melting peak, and heat of combustion related characteristics.
Melting Range
FEP is a copolymer of hexafluoropropylene and tetrafluoroethylene, and therefore exhibits a melting range rather than a single, distinct melting point.
Reference documents indicate that the melting peak temperature measured by differential thermal analysis (DTA) is 257-263°C (495-505°F). For other thermal properties, refer to the material's typical property data sheet.
| Item | Attachment Content | Description |
|---|---|---|
| Material Composition | Hexafluoropropylene and tetrafluoroethylene copolymer | Exhibits a melting range |
| Thermal Analysis Method | Differential Thermal Analysis (DTA) | Retained according to original document method name |
| Melting Peak Temperature | 257-263°C / 495-505°F | Reference material value, not 4610 measured specification |
Heat of Combustion & Oxygen Index
Reference documents indicate that the heat of combustion of the described FEP fluoropolymer resin is extremely low. Combined with a high oxygen index, this characteristic makes the material suitable for evaluation in applications requiring minimized fire risks.
This article is compiled based on the Thermal Properties chapter of the reference attachment "Product and Properties Handbook". The original chapter does not provide independent thermal analysis curves; the webpage only displays the listed temperature range using CSS and does not add estimated curves. Brand name substitution does not constitute proof of equivalent material performance: for the thermal properties, processing conditions, and service range of EverflonTM FEP 4610, please refer to the corresponding technical data and test results.