Blog

Blog

FEP Melting Range and Thermal Properties

Nov. 04, 2026

Everflon FEP Thermal Properties
FEP Thermal Properties

EverflonTM FEP 4610

Thermal Properties & Melting Temperature

Melting range, thermal analysis melting peak, and heat of combustion related characteristics.

Data Applicability Note: This article uses EverflonTM FEP 4610 as the product name. The temperature and performance descriptions in the attachment are reference data from other manufacturers' materials and do not represent actual measured results or guaranteed specifications for 4610.
THERMAL PROPERTIES

Melting Range

FEP is a copolymer of hexafluoropropylene and tetrafluoroethylene, and therefore exhibits a melting range rather than a single, distinct melting point.

Reference documents indicate that the melting peak temperature measured by differential thermal analysis (DTA) is 257-263°C (495-505°F). For other thermal properties, refer to the material's typical property data sheet.

Melting peak temperature range listed in the attachment by DTA
257° C495° F
263° C505° F
This figure only visualizes the 257-263°C range listed in the attachment, and is not an actual DTA measured curve, nor does it represent the melting start and end temperatures of a single specimen.
Reference Data for Thermal Properties Chapter
ItemAttachment ContentDescription
Material CompositionHexafluoropropylene and tetrafluoroethylene copolymerExhibits a melting range
Thermal Analysis MethodDifferential Thermal Analysis (DTA)Retained according to original document method name
Melting Peak Temperature257-263°C / 495-505°FReference material value, not 4610 measured specification
Melting peak temperature, processing temperature, and continuous use temperature are distinct concepts. The melting peak range in this article cannot be directly used as processing setpoints or long-term service temperatures.
HEAT OF COMBUSTION

Heat of Combustion & Oxygen Index

Reference documents indicate that the heat of combustion of the described FEP fluoropolymer resin is extremely low. Combined with a high oxygen index, this characteristic makes the material suitable for evaluation in applications requiring minimized fire risks.

This chapter does not list measured values for heat of combustion, nor does it provide fire safety certifications for specific products. Descriptions of materials with low heat of combustion and high oxygen index do not equate to safety guarantees for finished products under actual fire conditions.

This article is compiled based on the Thermal Properties chapter of the reference attachment "Product and Properties Handbook". The original chapter does not provide independent thermal analysis curves; the webpage only displays the listed temperature range using CSS and does not add estimated curves. Brand name substitution does not constitute proof of equivalent material performance: for the thermal properties, processing conditions, and service range of EverflonTM FEP 4610, please refer to the corresponding technical data and test results.