Blog

Blog

FEP Dielectric Constant and Dissipation Factor

Nov. 11, 2026

FEP Dielectric Constant and Dissipation Factor
FEP

EverflonTM FEP 4610

FEP Dielectric Constant and Dissipation Factor

Explore the influence of frequency and temperature on dielectric properties.

Source data, charts and compliance statements concern another manufacturer’s reference material. Renaming a grade does not establish equivalence or measured performance for Everflon FEP 4610. Curves are approximate illustrations, not engineering input.
ELECTRICAL PROPERTIES

Electrical Properties

The text reports a dielectric constant of about 2.04–2.05 from 1 kHz to 13 GHz. Dissipation factor rises from 0.00006 at 1 kHz to 0.0006 at 30 MHz, with a stated peak near 0.001 at about 1 GHz.

Temperature significantly affects loss, although curve shapes are similar. The author's expectation of similar values across its own grades does not establish equivalence across manufacturers.

Reference values from the chapter text
ItemFrequencyValue
Dielectric constant1kHz–13GHzApprox. 2.04–2.05
Dissipation factor1kHz0.00006
Dissipation factor30MHz0.0006
Loss peak, as stated in textApprox. 1 GHzApprox. 0.001
Text and plotted values do not agree exactly; both are retained rather than forced into one precise dataset.
FREQUENCY EFFECT

Frequency Effect

Figure 20 | Dielectric constant at room temperatureApproximate source redraw; not measured 4610 data.
Dielectric constant
Frequency (Hz, logarithmic)
Approximate source redraw; not measured 4610 data.

Approximate source redraw; not measured 4610 data.

Figure 21 | Dissipation at room temperatureApproximate source redraw; not measured 4610 data.
Dissipation factor
Frequency (Hz, logarithmic)
Approximate source redraw; not measured 4610 data.

Approximate source redraw; not measured 4610 data.

TEMPERATURE EFFECT

Temperature Effect

Figures 22–23 compare 21°C, 100°C and 150°C. Read temperature together with frequency; higher temperature does not necessarily increase or decrease loss at every frequency.

Figure 22 | Dielectric constant vs temperatureApproximate source redraw; not measured 4610 data.
Dielectric constant
Frequency (Hz, logarithmic)
21°C100°C150°C

Approximate source redraw; not measured 4610 data.

Figure 23 | Dissipation vs temperatureApproximate source redraw; not measured 4610 data.
Dissipation factor
Frequency (Hz, logarithmic)
21°C100°C150°C

Approximate source redraw; not measured 4610 data.

Source data, charts and compliance statements concern another manufacturer’s reference material. Renaming a grade does not establish equivalence or measured performance for Everflon FEP 4610. Curves are approximate illustrations, not engineering input. · Product and Properties Handbook: Electrical Properties; Frequency Effect; Temperature Effect